DJI Matrice 400 2510F Propeller

DJI Matrice 400 2510F Propeller

Overview
DJI Matrice 400 2510F Propellers (Pair) are the factory-matched, high-thrust rotors for the Matrice 400 platform.
The carbon-fiber composite 25 × 10-inch blades fold for transport yet lock rigid under load, delivering stable lift for the M400’s 59-minute endurance and 6 kg payload ceiling while maintaining IP55 environmental sealing.

Tips
2510F propellers are exclusive to the Matrice 400 Series.
Do not mix with other prop models.
Inspect blades before every flight; replace immediately if chipped, cracked, or warped.
Always use new screws when replacing propellers and apply medium-strength thread-locker (Loctite 243 recommended).
Tighten screws to the torque spec listed in the M400 user manual to avoid imbalance or motor damage.

Specifications
Dimensions: 63.5 cm diameter, 25 cm pitch (25 × 10 in)
Material: Carbon-fiber reinforced polymer, foldable hub
Weight (single blade): ˜ 176 g
Operating Temp: –4 °F – 122 °F (–20 °C – 50 °C)

In the Box
1x Clockwise 2510F Propeller
1x Counter-Clockwise 2510F Propeller
6x Propeller Mounting Screws

Compatibility
DJI Matrice 400 Series