Micasense Altum-PT Multispectral Kit + DJI Skyport for M300
To continue browsing our site, you must accept our Terms and Conditions on the use of cookies

      Micasense Altum-PT Multispectral Kit + DJI Skyport for M300

      €24,581.55
      Tax included
      Sob Encomenda
      8554888742956
      Quantity :

      Micasense Altum-PT Multispectral Kit + DJI Skyport for M300

      Altum-PT is a 3-in-1 solution optimized for advanced remote sensing and agricultural research. It seamlessly integrates an ultra-high resolution panchromatic imager, a new thermal imager that provides twice the ground resolution of the previous Altum and five discrete spectral bands, enabling plant-level applications such as early-stage stand counting. Altum-PT also features a global shutter for distortion-free results, open APIs and a new storage device that allows up to 2 captures/second. This sensor kit comes ready for integration with DJI SkyPort-compatible drones (Matrice 300, Matrice 200 V2 and Matrice 210 V2). However, integration with the DJI M210 RTK drone has not been validated, so we cannot guarantee compatibility.

      Specifications
      Weight: 577 g / 20.35 oz. Altum-PT + Wi-Fi + CFexpress card + DLS2 and cables
      Dimensions: 11.0 x 8.0 x 6.9 cm / 4.3 in. x 3.1 in. x 2.7 in.
      External power supply: 7.0 V - 25.2 V
      Power input: 5.5 / 7.0 / 10W (standby, average, peak)
      Sensor resolution: 2064 x 1544 (3.2MP per MS band), 4112 x 3008 (12MP per PAN band), 320 × 256 thermal infrared
      Spectral bands: Blue (475nm ±32nm), Green (560nm ±27nm), Red (668nm ±14nm), Red Edge (717nm ±12nm), NIR (842nm ±57nm)
      RGB color output: 12.4 MP (global shutter, aligned with all bands)
      Capture rate: Up to 2 captures per second DNG raw - Capture rates vary based on the write speed of the USB storage device and user configuration settings
      Thermal: FLIR LWIR thermal infrared 7.5-13.5um radiometrically calibrated
      Multispec GSD (per multispec band): 5.28 cm per pixel at 120 m / 2 in. per pixel at 400 ft.
      Thermal GSD: 33.5 cm per pixel at 120 m / 13 in per pixel at 400 feet
      Panchro and Pansharpened GSD: 2.49 cm per pixel at 120 m / 0.98 in. per pixel at 400 ft.
      Interfaces: 3 configurable GPIO: select between trigger input, PPS input, PPS output and top-of-frame signals. Virtual host button. USB 2.0 port for WiFi. Serial. Ethernet 10/100/1000. CFexpress for storage.
      Field of view: 50° HFOV x 38° VFOV (multispectral), 46° HFOV x 35° VFOV (panchromatic), 48o x 39o (thermal)
      Storage: CFexpress card

      In the box
      1x Altum sensor
      1x SkyPort adapter
      1x DLS 2 with built-in GPS
      1x Calibrated Reflection Panel (CRP 2)
      1x WiFi USB dongle
      1x Lens cap
      1x CFexpress card
      1x CFexpress card reader
      1x Carrying case
      Quick start guide
      Necessary integration cables
      Assembly tool kit

      805-00093

      Specific References

      New

      8 other products in the same category: