DJI LiDAR Range Finder (RS)

DJI LiDAR Range Finder (RS)

The LiDAR focusing system makes it easy to focus when shooting with the camera in your hand, without relying on the texture of the subject"s surface. This is especially useful in low-light environments and results in exceptional focusing capabilities. The new LiDAR Rangefinder (RS) can project 43,200 range points, detect within a range of 14 meters, [1] and has an integrated camera with a 30 mm equivalent focal length and a wide 70° FOV, which can handle the focusing needs of most scenarios. Pairing it with the new Focus Motor (2022) also makes it possible to autofocus on manual lenses after calibration.
With the LiDAR Rangefinder (RS), the RS 3 Pro supports ActiveTrack Pro, providing improved subject identification and tracking performance.

1. Tested in an environment without strong light. In normal shooting environments, the detection distance for human objects is 7 meters.

Tips
Range of 14 m and has a built-in camera with a focal length equivalent to 30 mm and an FOV of 70°. Enables autofocus on manual lenses and improves tracking.

Specifications
Accessory port:
Cold shoe
1/4"-20 mounting hole
USB-C port
USB-C/CVBS/CAN data power port

Image sensor:
Resolution: 448×298 on touch screen
FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)
Focal length: 30 mm equivalent

ToF sensor:
Resolution: 240×180
Detection range: 0.5-14 m
Distance error: 1%

Automatic learning:
Can recognize up to five targets at the same time and choose one to follow.
Identification distance: 9 m

Electrical properties:
Power consumption: 6.8 W
Input: 7 to 16 V

Operating temperature:
-20° to 45°C (-4° to 113° F)

Mechanical properties:
Dimensions: 66×57×24 mm (L×W×H)
Weight: Approx. 130 g
Mounting plate height: 30 mm

Lenses that do not require calibration:
DZOFILM Vespid Cyber 35/50/75 mm

In the box
1x LiDAR Range Finder (RS)
1 Multi-camera control cable (USB-C, 30 cm)
1x LiDAR control cable (USB-C, 30 cm)

Compatibility
DJI RS 4 Pro
DJI RS 3 Pro