DJI RC Plus 2 sub2G SDR Module

DJI RC Plus 2 sub2G SDR Module

Overview
The DJI RC Plus 2 sub-2 G SDR Module is a rear-mounted antenna array that unlocks the 1.4 GHz and 902–928 MHz bands on the DJI RC Plus 2 Enterprise Enhanced remote controller.
By shifting video-control traffic below 2 GHz, the module dramatically improves penetration through terrain, foliage, and urban clutter, extending Matrice 400 command-and-control range in RF-challenging environments.
A built-in status LED offers at-a-glance confirmation of band selection and operating state.

Tips
Sub-2 G bands are region-dependent; always verify local regulations before enabling.
RC firmware v14.1 or later and aircraft firmware v14.1 or later are required.
Install with the controller powered off.
Tighten mounting screws to the torque specified in the RC Plus 2 manual.

Specifications
Supported Bands: 902–928 MHz (FCC/ISM) | 1.430–1.444 GHz (SRRC)
Channels / Streams: 2 T × 2 R (MIMO)
Antenna Type: High-gain monopole array, vertically polarized
Status Indicator: Tri-color LED shows link state & band in real time
Mounting: Rear slide-in bay, captive screws (included)
Operating Temp: –4 °F – 122 °F (–20 °C – 50 °C)
Dimensions: 56 × 45 × 20 mm
Weight: 35 g

Compatibility
DJI RC Plus 2 Enterprise Enhanced Remote Controller
DJI Matrice 400 Series