DJI Agras T25

DJI Agras T25

The Agras T25 incorporates all the advanced features of the T50 in a smaller, portable design. It can carry a payload of 20 kg of spray or 25 kg of scatter and includes the main features of the T50, such as multi-directional obstacle avoidance, terrain tracking, ultra-fast battery charging, one-touch take-offs and automatic operations. The DJI AGRAS T25 is equipped with front and rear phased array radars, a binocular vision system and a high-resolution FPV gimbal camera. It supports various missions, from surveying to spraying and spreading, and excels in a wide variety of terrains.

Specifications
Weight: 25.4 kg (without battery)
32 kg (incl. battery)
Maximum take-off weight:
Maximum take-off weight for spraying: 52 kg (at sea level)
Maximum take-off weight for spraying: 58 kg (at sea level)
Maximum diagonal wheelbase: 1925 mm
Dimensions:
2585×2675×780 mm (arms and propellers unfolded)
1475×1540×780 mm (arms unfolded and propellers folded)
1050×690×820 mm (arms and propellers folded)
Flight accuracy range (with strong GNSS signal)
RTK activated:
Horizontal: ±10 cm,
Vertical: ±10 cm
RTK deactivated:
Horizontal: ±60 cm,
Vertical: ±30 cm (radar module activated: ±10 cm).
RTK/GNSS Operating frequency
RTK:
GPS L1/L2, GLONASS F1/F2, BeiDou B1I/B2I/B3I, Galieo E1/E5b, QZSS L1/L2
GNSS: GPS L1, BeiDou B1I, GLONASS F1, Galieo E1, QZSS L1
Maximum configurable flight radius: 2000 m
Maximum wind resistance: 6 m/s

In the box
1x Agras T25
1x Toolbox
1x Manual
1x Remote control
1x Remote control strap
1x USB-C cable
1x Screw and accessory kit (Sealing rings, Single layer centrifugal disk, Propeller washers, Phillips screws, 10 M5 screws, Hose nuts)
1x Tool kit (Double socket wrench, 2.5mm hexagonal wrench, 3.0mm hexagonal wrench, 4.0mm hexagonal wrench)