DJI Matrice 300 RTK

DJI Matrice 300 RTK Enterprise

Specifications:

Dimension - 810x670x430 (L x W x H)
Weight - 3.6 kg without batteries
- 6.3 kg with batteries
Maximum load capacity. (payload) - 2.7 Kg
Maximum take-off weight (MTOW) - 9 kg
Operating Frequency - 2.4000-2.4835 GHz
- 5,725-5,850 GHz
Maximum ascent speed - S Mode: 5 m/s
- P mode: 4 m/s
Maximum descent speed - S mode: 7 m/s (25.9 km/h)
Maximum wind resistance - 15 m/s (54 km/h)
Maximum range - 55 m (optimal conditions and no payload)
Maximum speed - S mode: 23 m/s (85.1 km/h)
- P mode: 17 m/s (62.9 km/h)
Ingress Protection Rating IP45 - Protection against solid objects larger than 1 mm, (eg.
tools, wires and small wires).
Protection against low pressure water jets coming from various directions.
Operating Temperature - -20°C to 40°C (-4°F to 104°F)
First Person View Camera - 960p, 30fps

Additional features:

- Top and bottom auxiliary light focus - effective light up to 5m away
- Possibility to change the UAV"s batteries without having to disconnect it.
- Possibility of flying with only one of the two batteries in case of anomaly.
- Safety system in case of failure of one of the rotors.
- Redundancy of systems, two IMU (inertial measurement unit), two compasses and two barometers.
- It has the "Smart Track" functionality, that is, the possibility of following people and vehicles, and the information can be sent to another Vant so that the Target continues to be followed at a greater distance.
- Possibility of taking a frame of an object/target, that is, the drone to change batteries or location and automatically return to the same location and angle from which the frame was taken.
- Primary Flight Display (PFD), provides the pilot, among others, with information about the Altitude Ground Level, wind intensity and direction
- Possibility of a second pilot taking control of the drone in a geographically different location.

Accessories included:

1x Radio control
1x USB charger
1x USB-C cable
1x Battery for the WB37 radio control
2x Propellers (CW)
2x Propellers (CCW)
2x Landing trains
1x Spare stick cover
2x propeller fasteners
4x Replacement rubbers for camera stabilizer support plate
1x USB Cable
1x Vision System Calibration Plate
1x Equipment charging box

*Does not include batteries and charger for the drone. They must be purchased separately.